What Is Video Encoding?
Video encoding is the practice of converting raw video files into a digital format. This process compresses, stores, or distributes video content digitally. If you’ve ever streamed a video on YouTube or Netflix, downloaded a movie, or shared a video clip online, then you’ve directly benefited from video encoding.
Video encoding is a method that translates raw video data captured by a camera into a digital format. This format can be easily stored, transmitted, and played back on various devices. It involves a series of complex mathematical algorithms that process and compress the raw data, significantly reducing the file size while minimizing the impact on video quality.
The resulting encoded video file is a digital package containing video and audio data. It is typically much smaller than the original raw footage, making it easier to store and transmit over networks.
This is part of a series of articles about video optimization.
In this article:
- Why Is Video Encoding Needed?
- How Does Video Encoding Work?
- Popular Format and Codecs Used in Video Encoding
- Video Encoding Best Practices
- Encoding Video Automatically With Cloudinary
- Steps to Encode a Video with Cloudinary
Why Is Video Encoding Needed?
Reducing File Size
One of the primary reasons for video encoding is to decrease the size of the raw video files. Uncompressed video files can be very large, making them difficult to store, share, or stream online. For instance, just a minute of uncompressed high-definition video can take up several gigabytes of storage space. This poses a significant problem, especially when dealing with long-form content such as movies or TV shows.
Video encoding combines lossy and lossless compression techniques to reduce file size. It works by eliminating redundant data and approximating certain information, resulting in a much smaller file that retains the overall quality of the original video. This makes encoded video files more manageable and practical for storage and distribution.
Optimizing Video Quality
Video encoding doesn’t just reduce file size but also optimizes the video’s quality. The process involves balancing the right amount of compression to maintain a high-quality video while keeping the file size manageable. Too much compression can lead to a noticeable loss of video quality, while too little might not significantly reduce the file size.
Video encoders use a variety of techniques to optimize video quality. This includes adjusting the bit rate, frame rate, and resolution to achieve the best possible quality for a given file size.
Ensuring Video Compatibility
Another crucial aspect of video encoding is ensuring compatibility across different devices and platforms. Not all video formats and codecs are supported by every device or media player. Therefore, encoding video files into popular, widely-supported formats is essential for ensuring they can be played back on any device.
Video encoding also ensures that videos can be streamed smoothly over various network conditions. For instance, video streaming services like Netflix use adaptive bitrate streaming, which adjusts the quality of the video in real-time based on the viewer’s network conditions. This would not be possible without video encoding.
How Does Video Encoding Work?
Video encoding is a process that involves several steps:
- Raw video data is divided into frames. Each frame is then analyzed to remove any redundant or unnecessary information. This process, known as compression, significantly reduces the size of the video file.
- The compressed data is encoded using a specific codec. A codec, short for coder-decoder, is a program that encodes and decodes digital data. It transforms the compressed video data into a format that can be easily stored and transmitted.
- The encoded data is packaged into a container. A container is a file format that holds the encoded video and audio data and any additional information, such as subtitles or metadata.
- The resulting file is the final encoded video, ready to be stored, shared, or streamed.
Popular Format and Codecs Used in Video Encoding
Here are some of the most popular codecs used today to deliver videos to end users:
H.264 (AVC)
H.264, also known as AVC (Advanced Video Coding), is one of the most widely used video codecs. It offers excellent compression efficiency, resulting in high-quality videos with relatively small file sizes. H.264 is commonly used for streaming video content on platforms like YouTube and Netflix.
Learn more in our detailed guide to H.264 video encoding
H.265 (HEVC)
H.265, or HEVC (High Efficiency Video Coding), is the successor to H.264. It offers even better compression efficiency, allowing for higher quality videos at the same file size. This makes it ideal for streaming high-definition content, such as 4K and 8K video.
AV1
AV1 is a relatively new video codec developed by the Alliance for Open Media. It aims to provide superior compression efficiency compared to both H.264 and H.265, without the burden of patent licensing fees. AV1 is increasingly being adopted by major tech companies and video streaming services.
VP9
VP9 is a video codec developed by Google. It offers comparable compression efficiency to H.265, but like AV1, it is free from patent licensing fees. VP9 is widely used for streaming video content on Google’s platforms, including YouTube.
Video Encoding Best Practices
Here are a few best practices that will help you effectively encode video content.
Bitrate Selection
Bitrate refers to the amount of data processed per unit of time, typically measured in kilobits per second (Kbps). It plays a significant role in determining the quality and size of your encoded video. Higher bitrates produce better quality but larger file sizes. Conversely, lower bitrates result in smaller files but poorer quality.
Choosing the right bitrate involves a fine balance between quality and file size. A high-quality video that takes too long to load or buffers excessively can frustrate viewers. Conversely, a fast-loading, low-quality video may not engage viewers. To strike the right balance, consider your audience’s average internet speed and the device they’ll use to watch the video.
Variable bitrate (VBR) and constant bitrate (CBR) are two encoding methods you should be aware of. VBR adjusts the bitrate according to the video’s complexity, providing better quality and smaller file sizes. However, it requires more processing power. On the other hand, CBR maintains a steady bitrate throughout the video, which is beneficial for streaming but may result in larger file sizes.
Resolution and Aspect Ratio
Resolution refers to the number of pixels displayed on the screen. The more pixels, the higher the video quality. Common resolutions include 480p (SD), 720p (HD), 1080p (Full HD), and 2160p (4K). However, higher resolutions result in larger file sizes, so consider your viewers’ devices and internet speed when choosing a resolution.
Aspect ratio, on the other hand, is the proportional relationship between a video’s width and height. The most common aspect ratios are 4:3 (standard) and 16:9 (widescreen). When encoding, ensure that your video’s aspect ratio matches the player’s to avoid pillarboxing (vertical black bars) or letterboxing (horizontal black bars).
Frame Rate Considerations
Frame rate is the number of frames displayed per second (fps). It heavily influences the smoothness of your video. Common frame rates are 24, 25, 30, 50, and 60 fps. The higher the frame rate, the smoother the video and the larger the file size.
Consider your source material and the final output when choosing a frame rate. If you’re working with footage shot at a high frame rate, you may want to maintain that in your encoded video. However, if you’re encoding for the web, where lower frame rates are more common, you may want to lower your frame rate.
Keyframe Intervals
Keyframes or I-frames are frames that contain complete image data. They serve as reference points for the frames that follow, which only contain changes from the keyframe. The distance between keyframes, known as the keyframe interval or GOP (Group of Pictures) size, influences video quality and file size.
A short keyframe interval results in higher quality but larger file sizes, as more keyframes mean more complete image data. A long keyframe interval reduces file size but may lower quality, as changes might not be accurately reflected. When encoding, find a balance that suits your needs. A keyframe interval of 2 seconds is a good starting point for most applications.
Testing and Quality Assurance
After encoding your video, it must be tested before distribution. Play the video on different devices and browsers to ensure it plays smoothly and looks good. Pay close attention to scenes with fast motion or complex details, as these will likely show encoding artifacts.
In addition to visual inspection, there are objective quality metrics you can use, such as PSNR (Peak Signal-to-Noise Ratio), SSIM (Structural Similarity Index), and VMAF (Video Multi-method Assessment Fusion), to assess your video’s quality. These metrics quantify differences between your source and encoded videos, providing a more accurate assessment than subjective visual inspection alone.
Encoding Video Automatically With Cloudinary
When it comes to media optimization and image transformations, one brand stands out from the crowd—Cloudinary. It is a robust cloud-based service designed to simplify and automate how developers handle videos, images, and other media files on their websites. Cloudinary has gained traction for a myriad of powerful features it offers, and one such essential feature is automatic video encoding.
Optimizing the viewing experience while maintaining low latencies can be a challenge. That’s when video encoding comes into play, and trust us, with Cloudinary, it’s never been easier! We’re here to introduce you to easy-to-follow steps to encode videos automatically using Cloudinary. By following these steps, you’ll be able to optimize your website’s media and provide a seamless user experience.
Steps to Encode a Video with Cloudinary
- Create a Cloudinary Account: The first step is to sign up for a free Cloudinary account if you haven’t done so already.
- Upload Your Video: Navigate to your Cloudinary console and tap the “Upload” button in the media library. Choose the video file you want to encode and upload it.
- Transform Your Video: Once uploaded, it’s time to apply transformations to your video file. Find the video in your media library, click on it, and then choose “Transform”. Here, you can trim, rotate, adjust quality, apply effects, and tailor the video to your needs.
- Encode the Video: After applying the desired transformations, you’re all set to encode your video. Under the “Transformations” section, click “Convert format” and choose the format you want to encode your video.
- Deliver Your Video: Once the encoding process is done, it’s time to deliver! Cloudinary automatically generates a unique URL for each video after encoding. You can simply use this URL to embed the video on your website.
Remember, optimized videos contribute greatly to a better user experience. With Cloudinary, you’re not just transforming and encoding videos but upgrading your entire web media delivery system. Make the most of automated video encoding and give your website the optimization it deserves.